Läs mer om våra produkter på www.mimsafe.se

MIMsafe Variocage

MIMsafe Variogate

MIMsafe Barrier

MIMsafe Accessories




Crash safety



Contact us


Our company is credit worthy according to Bisnode's credit assessment system that is based on a number of decision rules. This credit rating is updated on a daily basis, and always shows the current rating and date.

Company / Quality

Quality policy

MIM Construction AB develops, manufactures and distributes safety and styling products for the European vehicle market.

Our products shall be delivered on the right time and with a quality that corresponds to the needs and expectations of the customer.

MIM Construction shall through constant improvements always be the obvious supplier.

Mim Construction is ISO9001 certified by LROA Sverige AB since 1999.

Crash standards

The net partitions by MIM are crash tested and approved by TÜV according to the DIN 75410-2 standard.

At the test a box weighing 10 kilos is pushed against the net at a speed of 40 km/h. (This force is the same as if the car crashes at 85 km/h.) To pass the test, the net may not come loose or get deformed more than 200 mm.

The load dislocation protections by MIM are tested according to SMS 2562 and fulfil the requirements according to TVSVFS 1978:9.

The protection effect shall apply to the total surface between the floor and the ceiling.

At an arbitrary chosen spot at the protection, however not at a strengthening, a test body is applied. The test body has a square end where the side is 50 mm and the radius of the edge is maximum 0,5 mm. Through the end surface of the test body being applied during at least 10 seconds, a force equivalent to 0,3 times the maximum cargo weight of the vehicle, perpendicular to the protection.

Material Qualities

Our products fulfil the demands according to the terms in RoHS 2002/95 and our production follows national legislation as for the rest.

Our most common raw materials are;Steel profiles EN 10305-3 E235 Thin sheet 0,5 - 3,0 mm EN 10130AN DC01 Sheet metal >3,0 mm EN 10025 S235JR G2 Galvanized sheet metal EN 10142 DX51D+Z275MA

MIM Construction AB - designing and manufacturing security since 1986
Myren 125, SE-462 94 FRäNDEFORS, Tel: +46-(0)10-5500450, info@mim.se.